Our Products

Brass Sheet / Plate / Coil

Brass UNS C36000 Plates, Brass Coils, Brass Plates, Brass Hot Rolled Sheets, ASME SB 62 Plate, Carpenter Plate, Brass Circle, Brass Hot Rolled Plates Supplier in Mumbai, India.

Brass Cold Rolled Plates, Brass Plate Exporter, ASTM B 62 Brass Shim Sheets, Brass Sheets, Brass Strips, Brass Sheets Dealer in India.

PRATAP STEEL INDUSTRIES is one of the pioneer exporting houses and supplier of Brass Sheets Plates Coils, which are all prone to sigma phase formation if exposed for long periods to a temperature of about 590 Degree C to 870 Degree C. The problem of grain boundary carbide precipitation in Brass Plates was discussed under inter – granular corrosion. This same phenomenon occurs when Brass Coils are exposed in service to temperatures of 425 Degree C to 815 Degree C, resulting in a reduction of corrosion resistance which may be significant. If this problem is to be avoided the use of stabilised grades such as Brass Slatting Coils should be considered. A further problem that Brass Perforated Coils have in high temperature applications is the formation of sigma phase. The formation of sigma phase in Brass Plates is dependent on both time and temperature and is different for each type of steel. In general, Brass Coils is practically immune to sigma phase formation, but not so those grades with higher chromium contents with molybdenum or with higher silicon contents. Sigma phase embrittlement refers to the formation of a precipitate in the microstructure of Brass Slatting Coils over a long period of time within this particular temperature range. Generally, beta – phase Brass Perforated Coils is the more ductile phase and alpha – phase is stronger yet less ductile, due to the larger number of slip planes in the bcc structure of the beta – phase in comparison to the hcp alpha – phase.

Brass Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 62 Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Thickness : 0.1mm to 100 mm Thk Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, No.3, No.4, HL, BA, 8K Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

 

Types of Brass Sheets, Plates & Coils

Brass Foils Brass Foils
Carpenter Brass Foils
Brass UNS C36000 Foils
ASME SB62 Brass Foils
Brass Shim Sheet Brass Shim Sheet
Brass UNS C36000 Shim Sheet
ASTM / ASME SB62 Brass Shim Sheet
Brass Polished Plates Polished Brass Plates
Brass UNS C36000 Polished Plates
ASTM / ASME SB62 Brass Polished Plates
Brass Hot Rolled Plates Brass Hot Rolled Plates
Carpenter Brass Hot Rolled Plates
Brass UNS C36000 Hot Rolled Plates
ASME SB62 Brass Hot Rolled Plates
Brass Cold Rolled Plates Brass Cold Rolled Plates
Brass UNS C36000 Cold Rolled Plates
ASTM / ASME SB62 Brass Cold Rolled Plates
Brass Coils Brass Coils
Brass UNS C36000 Coils
ASTM / ASME SB62 Brass Coils
Brass Strips Brass Strips
Carpenter Brass Strips
Brass UNS C36000 Strips
ASME SB62 Brass Strips
Brass Circle Brass Circle Brass Circle
Carpenter Brass Circle
Brass UNS C36000 Circle
ASME SB62 Brass Circle

 

Brass Sheet, Plate & Coil Chemical Composition

Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4

Brass Sheet, Plate & Coil Physical Properties

Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi

Brass Sheet, Plate & Coil Price List

  • Brass Slatting Coil
    FOB Price: US $0.1-500 / Piece
  • Carpenter Polished Plates
    FOB Price: US $0.1-500 / Piece
  • Brass shim sheets
    FOB Price: US $0.1-500 / Piece
  • Brass plates
    FOB Price: US $0.1-500 / Piece
  • Brass coils
    FOB Price: US $0.1-500 / Piece

Brass Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Brass Sheets, Plate & Coils Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM / ASME SB 62 Brass Sheets, Plate & Coils Value Added Services

Material Testing:
We at PRATAP STEEL INDUSTRIES ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Brass Sheets, Plate & Coils Packaging

Brass Sheets Packing Brass Plates Packaging We do care about the quality of our products even some little details are paid attention to. Each order is packaged according to the customer’ s standards including preparation for export such as wooden case, pallet or according to customer’s requirement All shipping documentation is provided for Brass Sheet, Plate and Coil delivery from mill to customer. Every assignment begins with a visit of our experienced sales representative who assesses the volume / weight of the belongings and brief the client about the nature of packing required as well as various documentation formalities when moving from India.

Brass Sheets, Plate & Coils Manufacturer Popular Searches

carpenter plates Exporter in India, Brass chequered plate, Brass coil stockholder, Brass sheet, Brass hot rolled plates dealers, Brass cold rolled sheet distributors, asme SB62 Brass sheets Suppliers, Brass plates price india, Brass sheet, Brass sheets specification, Brass sheets exporter in India, Brass coils, Brass UNS C36000 coils, Brass plates, coils, Brass plates, Brass shim sheets, Brass sheets price.

Brass Sheets, Plate & Coils Flanges Supplier

Thiruvananthapuram, Abu Dhabi, Colombo, Noida, Mexico City, Petaling Jaya, Ahmedabad, Toronto, Manama, Lagos, Granada, Rajkot, Coimbatore, Port-of-Spain, Visakhapatnam, Gurgaon, Jamshedpur, Vadodara, Ahvaz, Ankara, Seoul, Chiyoda, Calgary, Perth, Ho Chi Minh City, Milan, New York, Algiers, Hanoi, Singapore, Pimpri-Chinchwad, Chennai, Kuwait City, Caracas, Busan, Haryana, Los Angeles, Bengaluru, Montreal, London, Jakarta, New Delhi, Bhopal, Thane, Hyderabad, Doha, Rio de Janeiro, Bangkok, Navi Mumbai, Lahore, La Victoria, Tehran, Bogota, Santiago, Nashik, Riyadh, Faridabad, Brisbane, Kanpur, Nagpur, Jaipur, Istanbul, Atyrau, Sharjah, Ludhiana, Jeddah, Dallas, Ranchi, Gimhae-si, Kuala Lumpur, Muscat, Dammam, Surat, Houston, Dubai, Aberdeen, Mumbai, Hong Kong, Madrid, Howrah, Cairo, Melbourne, Sydney, Ulsan, Kolkata, Chandigarh, Courbevoie, Geoje-si, Indore, Secunderabad, Al Jubail, Baroda, Al Khobar, Pune, Karachi, Ernakulam, Edmonton, Moscow, Vung Tau.

Brass Sheets, Plate & Coils Exporter

Mexico, Jordan, Mexico, Gabon, Indonesia, Algeria, Kazakhstan, Macau, France, Chile, Malaysia, Kenya, Libya, Poland, Brazil, Colombia, Bolivia, Italy, Russia, Peru, Tunisia, Turkey, Iraq, Belarus, Estonia, Singapore, Gambia, Lithuania, Spain, Croatia, Canada, Oman, United States, Greece, Azerbaijan, Qatar, Bangladesh, China, Costa Rica, Denmark, Afghanistan, Saudi Arabia, Vietnam, Sweden, Puerto Rico, Serbia, Israel, Kuwait, South Africa, Japan, Bahrain, Sri Lanka, Namibia, Taiwan, New Zealand, Iran, Romania, Bhutan, United Arab Emirates, Poland, Pakistan, Tibet, Thailand, Slovakia, Ecuador, Venezuela, Belgium, Australia, Hong Kong, Bulgaria, Norway, Switzerland, Zimbabwe, Germany, Czech Republic, Angola, Mongolia, Nigeria, Nepal, South Korea, Ireland, Egypt, Nigeria, Finland, Portugal, Philippines, Iran, Lebanon, Austria, Argentina, India, United Kingdom, Hungary, Morocco, Chile, Ukraine, Trinidad & Tobago, Netherlands, Ghana, Yemen.