Our Products

SMO 254 Wire

254 SMO Steel Coil Wire, 6Moly Wire, 254 SMO Filler Wire, ASTM A580 SMO Wire, SMO 254 Welding Suppliers and Exporters in Mumbai,India.

SMO UNS S31254 Bright Wire, Exporters of ASTM SA580 254 SMO Wire, Alloy 254 Wire, SMO WERKSTOFF NR. 1.4547 Wire Manufacturer in India.

PRATAP STEEL INDUSTRIES india is one of the pioneer exporter and trader of 254 SMO Wire, where the allowable design values are about 50 % higher than those for standard austenitic steels. Due to high levels of chromium, molybdenum, and nitrogen, our SMO 254 Wire is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants, and other high – chloride process streams. This means that the possibility of designing thinner walls in this SMO 254 Wire can save costs in material, transport and maintenance. The assemblies were tested under laboratory conditions to observe the fatigue endurance of our SMO 254 Coil Wire, when installed at various levels of applied alternating bending stress of the tube. This method applies a completely reversed bending stress on the fitting connection of this SMO 254 Electrode while pressurized with hydraulic oil at the tubing working pressure. The test samples of our SMO 254 Wire were flexed until either the fitting leaked, the tube fractured, or at least 10 million cycles were achieved, whichever occurred first. The strain level calculates to an alternating stress for this Alloy 254 Wire, where Rotary flexure testing procedures have been derived. Our Alloy 254 also reports that measured field data for piping systems suggest that if the system lasts beyond 10 million cycles, it will have infinite life.

SMO 254 Wire Specifications
Specifications : ASTM A580 ASME SA580 / ASTM A313 ASME SA313 Dimensions : ASTM, ASME Length : MAX 12000 mm Diameter : 5.5 To 400 mm Specialize : Wire, Filler Wire, Coil Wire, Electrode, Welding Electrode, Welding Wire

 

Types of SMO 254 Wire

SMO 254 Wire SMO 254 Wire SMO 254 Wire
254 Alloy Wire
254 SMO Wire
SMO UNS S31254 Wire
SMO WERKSTOFF NR. 1.4547 Wire
ASTM A580 254 SMO Wire
SMO 254 Coil Wire SMO 254 Coil Wire SMO 254 Coil Wire
254 Alloy Coil Wire
254 SMO Coil Wire
SMO UNS S31254 Coil Wire
SMO WERKSTOFF NR. 1.4547 Coil Wire
ASME SA580 254 SMO Coil Wire

 

254 SMO Wire Chemical Composition

Grade C Mn Si Cu S P Mo Ni Cr
SMO 254 0.02 1  0.08 0.5-1.0 0.01  0.03 6.0-6.5  17.5-18.5 19.5-20.5

SMO 254 Filler Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8 g/cm3 1320-1390 ℃ 650 300 35 %

Equivalent Grades for 254 SMO Wire

STANDARD WERKSTOFF NR. UNS SIS BS GOST AFNOR EN
SMO 254 1.4547  S31254  2378  – – Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7


SMO 254 Wire Price List

  • 254 Alloy Wire
    US $900-7771 / Metric Ton (FOB Price)
  • Alloy 254 Wire
    US $900-7771 / Metric Ton (FOB Price)
  • 6Moly Wire
    US $900-7771 / Metric Ton (FOB Price)
  • ASTM A580 254 Stainless Steel Wire
    US $900-7771 / Metric Ton (FOB Price)
  • ASME SA580 Gr.254 Wire
    US $900-7771 / Metric Ton (FOB Price)

SMO 254 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

254 SMO Wire Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME SMO 254 Wire Value Added Services

Material Testing:
We at PRATAP STEEL INDUSTRIES ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

SMO 254 Wire Packaging

SMO 254 Wire Packaging SMO 254 Wire PackingSMO 254 Wire are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. 254 SMO Wire come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Wire. SMO 254 ASTM A580 Wire packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.