Our Products

SS 304H Threaded Fittings

SS 304H Threaded Pipe Elbow, SS 304H Threaded Fittings, Stainless Steel 304H Threaded Fitting, 304H Stainless Steel Forged Threaded 90deg. Elbow, SS UNS S30409 Threaded Bushing, Stainless Steel 304H Threaded Cap, SS 304H Lateral Tee, SS 304H Screwed Fittings Supplier in Mumbai, India.

SS 304H Threaded Plug, Stainless Steel 304H Threaded Forged Fittings, ASTM A182 Stainless Steel 304H Threaded Elbow, SS 304H Hex Plug, SS WERKSTOFF NR. 1.4301 Threaded Cross, 304H SS Full Couplings Exporter in India.

PRATAP STEEL INDUSTRIES is among renowned production house and trader for Alloy 304H Forged Threaded Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means. The high sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability. If hot forming is required, once again, Stainless Steel 304H Forged Threaded Tee should be considered as an alternate selection. The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304. It is common for Stainless Steel 304H Forged Threaded Cap to be dual certified as 317 and 317L when the material meets the lower carbon limit of SS 317L. Avoid working Stainless Steel 304H Forged Threaded Fittings below 1700 Degree F (927 Degree C). For optimum corrosion resistance, a post – work annealing of Stainless Steel 304H Forged Threaded Coupling is recommended. Stainless Steel 304H Forged Threaded Union may be formed and fabricated through a full range of cold working operations. It can be used in heading, drawing, bending, and upsetting. Any cold working operations of Stainless Steel 304H Forged Threaded Bushing will increase the strength and hardness of the material. Stainless Steel 304H Forged Threaded Plug is a tough austenitic stainless steel subject to work hardening during deformation and is resistant to chip breaking.

ASME SA182M SS 304H Class 6000 Threaded Fittings, Stainless Steel 304H High Pressure Forged Fittings, ANSI B16.11 SS 304H Threaded Street Elbows, Stainless Steel 304H Hexagonal Plug, Stainless Steel 304H Threaded Union Dealer, 304H SS Pipe Nipple Stockholder

Stainless Steel 304H Threaded Forged Fittings
304H Stainless Steel 45 deg Threaded Elbow
Stainless Steel 304H Threaded Tee
SS 304H Threaded Cross
SS 304H Threaded Cap
Stainless Steel 304H 45 degree Threaded Elbow

Stainless Steel 304H Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

Types of SS 304H Threaded Forged Fittings

SS 304H Threaded Elbow Stainless Steel 304H Threaded Elbow SS 304H 45 Degree Threaded Elbow
304H SS 90 Degree Forged Threaded Elbow
304H Stainless Steel 45 Degree Forged Elbow
SS UNS S30409 45 Degree Forged Elbow
SS WERKSTOFF NR. 1.4301 45 Degree Elbow
ASME SA182 304H 90 Degree Forged Threaded Elbow
Stainless Steel 304H Threaded Tee Stainless Steel 304H Threaded Tee SS 304H Threaded Tee
304H SS Forged Tee
304H Stainless Steel Forged Threaded Tee
SS UNS S30409 Threaded Tee
SS WERKSTOFF NR. 1.4301 Forged Tee
ASTM A182 Stainless Steel 304H Threaded Tee
SS 304H Threaded Cross Stainless Steel 304H Threaded Cross SS 304H Threaded Cross
304H SS Forged Threaded Cross
304H Stainless Steel Threaded Cross
SS UNS S30409 Forged Threaded Cross
SS WERKSTOFF NR. 1.4301 Threaded Cross
ASTM A182 304H Stainless Steel Threaded Cross
SS 304H Threaded Cap Stainless Steel 304H Threaded Cap SS 304H Threaded Cap
304H SS Forged Threaded Cap
304H Stainless Steel Threaded Cap
SS UNS S30409 Forged Threaded Cap
SS WERKSTOFF NR. 1.4301 Threaded Cap
ASME SA182 304H Stainless Steel Forged Threaded Cap
SS 304H Threaded Coupling Stainless Steel 304H Threaded Coupling SS 304H Threaded Coupling
304H SS Threaded Coupling
Stainless Steel 304H Threaded Coupling
SS UNS S30409 Threaded Coupling
SS WERKSTOFF NR. 1.4301 Threaded Coupling
ASME 16.11 304H Stainless Steel Threaded Coupling
SS 304H Threaded Union Stainless Steel 304H Threaded Union SS 304H Threaded Union
304H SS Forged Threaded Union
304H Stainless Steel Threaded Union
SS UNS S30409 Forged Union
SS WERKSTOFF NR. 1.4301 Threaded Union
MSS SP-79 304H Stainless Steel Forged Union
SS 304H Threaded Bushing Stainless Steel 304H Threaded Bushing SS 304H Threaded Bushing
304H SS Forged Threaded Bushing
304H Stainless Steel Threaded Bushing
SS UNS S30409 Forged Bushing
SS WERKSTOFF NR. 1.4301 Threaded Bushing
ASTM A182 304H Stainless Steel Threaded Bushing
SS 304H Threaded Plug Stainless Steel 304H Threaded Plug SS 304H Forged Threaded Plug
304H SS Threaded Plug
304H Stainless Steel Forged Plug
SS UNS S30409 Threaded Plug
SS WERKSTOFF NR. 1.4301 Threaded Plug
ASTM A182 TP 304H Stainless Steel Threaded Plug
SS 304H Threaded Hex Plug Stainless Steel 304H Threaded Hex Plug SS 304H Hex Plug
304H SS Forged Hex Plug
304H Stainless Steel Threaded Hex Plug
SS UNS S30409 Hex Plug
SS WERKSTOFF NR. 1.4301 Forged Hex Plug
ASTM A182 304H Stainless Steel Threaded Hex Plug
SS 304H Hexagonal Plug Stainless Steel 304H Hexagonal Plug SS 304H Hexagonal Plug
304H SS Forged Hexagonal Plug
304H Stainless Steel Hexagonal Plug
SS UNS S30409 Forged Hexagonal Plug
SS WERKSTOFF NR. 1.4301 Hexagonal Plug
ASME SA182 304H Stainless Steel Forged Hexagonal Plug
SS 304H Threaded Pipe Nipple Stainless Steel 304H Threaded Pipe Nipple SS 304H Threaded Pipe Nipple
304H SS Forged Pipe Nipple
304H Stainless Steel Threaded Pipe Nipple
SS UNS S30409 Forged Pipe Nipple
SS WERKSTOFF NR. 1.4301 Threaded Pipe Nipple
ASME 16.11 304H Stainless Steel Threaded Pipe Nipple

 

SS 304H Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304H 0.10 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 – 8 – 10.5 –

Stainless Steel 304H Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 304H Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304H 1.4301 S30409 – – – – –

Stainless Steel 304H Forged Threaded Fittings Price List

  • SS 304H Forged Fittings
    FOB Price: USD $0.5-1000 / Piece
  • Stainless Steel 304H Threaded Fitting
    FOB Price: USD $0.5-1000 / Piece
  • 304H Stainless Steel Forged Threaded Fittings
    FOB Price: USD $0.5-1000 / Piece
  • ASTM A182 304H stainless steel Forged Fitting
    FOB Price: USD $0.5-1000 / Piece
  • SS 304H Threaded Fittings
    FOB Price: USD $0.5-1000 / Piece

Stainless Steel 304H Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304H Forged Threaded Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 304H Threaded Fitting Value Added Services

Material Testing:
We at PRATAP STEEL INDUSTRIES ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 304H Forged Fittings Packaging

SS 304 Forged Fittings Packaging 304H SS Threaded Fittings Packaging We focus on every procedure to assure quality, the package we usually take is pack SS 304H Threaded Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 304H Stainless Steel Forged Threaded Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The Stainless Steel 304H Threaded Fittings are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

SS 304H Forged Threaded Fitting Manufacturer Popular Searches

ss 304H threaded forged fittings dimensions,304H ss forged fittings definition, 3000 lb stainless steel forged fittings, 304H ss forged fittings definition, ss 304H forged steel fittings, ss 304H class 3000 fittings pressure rating, stainless steel 304H threaded fittings, ss 304H forged fittings price list, ss 304H forged fittings price, asme b16.11 fittings, 304H threaded fittings dimensions pdf,  150# stainless steel 304H threaded fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, class 300 fittings pressure rating, 304H ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss 304H pipe coupling dimensions, steel pipe fitting dimensions chart

Stainless Steel 304H Forged Fittings Supplier

Bhopal, Sharjah, Kanpur, Algiers, Al Jubail, Indore, Chiyoda, Hong Kong, Bogota, Istanbul, Brisbane, Gurgaon, Los Angeles, Rio de Janeiro, Kuala Lumpur, Jeddah, Ludhiana, Al Khobar, Coimbatore, Seoul, Madrid, Chennai, Gimhae-si, Visakhapatnam, Chandigarh, Dallas, London, Santiago, Mumbai, Doha, Mexico City, Noida, Jamshedpur, Caracas, Secunderabad, Nashik, Abu Dhabi, Toronto, Ranchi, Edmonton, Jaipur, Ahvaz, Granada, Dubai, Lahore, Sydney, Vadodara, Vung Tau, Lagos, Hyderabad, Calgary, Petaling Jaya, Dammam, Bengaluru, Nagpur, Melbourne, Perth, New Delhi, La Victoria, Tehran, Aberdeen, Ernakulam, Thiruvananthapuram, Ulsan, Jakarta, Port-of-Spain, Kuwait City, Hanoi, Bangkok, Montreal, Busan, Surat, Singapore, Navi Mumbai, Rajkot, Karachi, Baroda, Colombo, Pimpri-Chinchwad, Manama, Courbevoie, Atyrau, Pune, Cairo, Faridabad, Thane, Moscow, Riyadh, Ahmedabad, Ho Chi Minh City, New York, Muscat, Milan, Ankara, Kolkata, Howrah, Geoje-si, Haryana, Houston.

Stainless Steel 304H Threaded Fittings Exporter

Kenya, Switzerland, Taiwan, Iran, Iran, Saudi Arabia, Israel, France, Mongolia, Namibia, Qatar, Afghanistan, Denmark, China, Chile, Argentina, Mexico, Philippines, Canada, Bulgaria, Thailand, Morocco, Kuwait, Jordan, Egypt, Hong Kong, Australia, Japan, Belarus, Spain, Sweden, Tibet, Belgium, Nigeria, Costa Rica, Lithuania, Zimbabwe, New Zealand, Azerbaijan, Peru, Ukraine, United Arab Emirates, South Korea, Gabon, Mexico, Nigeria, Italy, Bangladesh, Poland, Ireland, Romania, Slovakia, Puerto Rico, South Africa, Algeria, Iraq, Czech Republic, Bhutan, Gambia, Macau, Lebanon, Norway, Ghana, Colombia, Greece, Estonia, Poland, Malaysia, Yemen, Libya, Croatia, Singapore, Finland, Serbia, Angola, Vietnam, Russia, India, Turkey, Pakistan, Netherlands, Bahrain, Indonesia, Germany, Bolivia, Trinidad & Tobago,Tunisia, Oman, United Kingdom, Portugal, Ecuador, Austria, Hungary, United States, Kazakhstan, Brazil, Sri Lanka, Venezuela, Chile, Nepal.