Our Products

SS 317L Threaded Fittings

317L Stainless Steel Forged Threaded 90deg. Elbow, SS 317L Threaded Fittings, Stainless Steel 317L Threaded Cap, Stainless Steel 317L Threaded Fitting, SS 317L Threaded Pipe Elbow, SS UNS S31703 Threaded Bushing, SS 317L Screwed Fittings Supplier in Mumbai, India.

SS 317L Threaded Plug, Stainless Steel 317L Threaded Forged Fittings, ASTM A182 Stainless Steel 317L Threaded Elbow, SS 317L Hex Plug, SS WERKSTOFF NR. 1.4438 Threaded Cross, 317L SS Full Couplings Exporter in India.

PRATAP STEEL INDUSTRIES is one of the prominent trader and supplier of Stainless Steel 317L Forged Threaded Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels. Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface. This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product. The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross. Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion ­ resisting material in corrosive environments. Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component. Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims. In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.

ANSI B16.11 SS 317L Threaded Street Elbows, Stainless Steel 317L High Pressure Forged Fittings, Stainless Steel 317L Threaded Union Dealer, Stainless Steel 317L Hexagonal Plug, ASME SA182M SS 317L Class 6000 Threaded Fittings, SS 317L Lateral Tee, 317L SS Pipe Nipple Stockholder.

Stainless Steel 317L Threaded Forged Fittings
317L Stainless Steel 45 deg Threaded Elbow
Stainless Steel 317L Threaded Tee
SS 317L Threaded Cross
SS 317L Threaded Cap
Stainless Steel 317L 45 degree Threaded Elbow

Stainless Steel 317L Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

Types of SS 317L Threaded Forged Fittings

SS 317L Threaded Elbow Stainless Steel 317L Threaded Elbow SS 317L 45 Degree Threaded Elbow
317L SS 90 Degree Forged Threaded Elbow
317L Stainless Steel 45 Degree Forged Elbow
SS UNS S31703 45 Degree Forged Elbow
SS WERKSTOFF NR. 1.4438 45 Degree Elbow
ASME SA182 317L 90 Degree Forged Threaded Elbow
Stainless Steel 317L Threaded Tee Stainless Steel 317L Threaded Tee SS 317L Threaded Tee
317L SS Forged Tee
317L Stainless Steel Forged Threaded Tee
SS UNS S31703 Threaded Tee
SS WERKSTOFF NR. 1.4438 Forged Tee
ASTM A182 Stainless Steel 317L Threaded Tee
SS 317L Threaded Cross Stainless Steel 317L Threaded Cross SS 317L Threaded Cross
317L SS Forged Threaded Cross
317L Stainless Steel Threaded Cross
SS UNS S31703 Forged Threaded Cross
SS WERKSTOFF NR. 1.4438 Threaded Cross
ASTM A182 317L Stainless Steel Threaded Cross
SS 317L Threaded Cap Stainless Steel 317L Threaded Cap SS 317L Threaded Cap
317L SS Forged Threaded Cap
317L Stainless Steel Threaded Cap
SS UNS S31703 Forged Threaded Cap
SS WERKSTOFF NR. 1.4438 Threaded Cap
ASME SA182 317L Stainless Steel Forged Threaded Cap
SS 317L Threaded Coupling Stainless Steel 317L Threaded Coupling SS 317L Threaded Coupling
317L SS Threaded Coupling
Stainless Steel 317L Threaded Coupling
SS UNS S31703 Threaded Coupling
SS WERKSTOFF NR. 1.4438 Threaded Coupling
ASME 16.11 317L Stainless Steel Threaded Coupling
SS 317L Threaded Union Stainless Steel 317L Threaded Union SS 317L Threaded Union
317L SS Forged Threaded Union
317L Stainless Steel Threaded Union
SS UNS S31703 Forged Union
SS WERKSTOFF NR. 1.4438 Threaded Union
MSS SP-79 317L Stainless Steel Forged Union
SS 317L Threaded Bushing Stainless Steel 317L Threaded Bushing SS 317L Threaded Bushing
317L SS Forged Threaded Bushing
317L Stainless Steel Threaded Bushing
SS UNS S31703 Forged Bushing
SS WERKSTOFF NR. 1.4438 Threaded Bushing
ASTM A182 317L Stainless Steel Threaded Bushing
SS 317L Threaded Plug Stainless Steel 317L Threaded Plug SS 317L Forged Threaded Plug
317L SS Threaded Plug
317L Stainless Steel Forged Plug
SS UNS S31703 Threaded Plug
SS WERKSTOFF NR. 1.4438 Threaded Plug
ASTM A182 TP 317L Stainless Steel Threaded Plug
SS 317L Threaded Hex Plug Stainless Steel 317L Threaded Hex Plug SS 317L Hex Plug
317L SS Forged Hex Plug
317L Stainless Steel Threaded Hex Plug
SS UNS S31703 Hex Plug
SS WERKSTOFF NR. 1.4438 Forged Hex Plug
ASTM A182 317L Stainless Steel Threaded Hex Plug
SS 317L Hexagonal Plug Stainless Steel 317L Hexagonal Plug SS 317L Hexagonal Plug
317L SS Forged Hexagonal Plug
317L Stainless Steel Hexagonal Plug
SS UNS S31703 Forged Hexagonal Plug
SS WERKSTOFF NR. 1.4438 Hexagonal Plug
ASME SA182 317L Stainless Steel Forged Hexagonal Plug
SS 317L Threaded Pipe Nipple Stainless Steel 317L Threaded Pipe Nipple SS 317L Threaded Pipe Nipple
317L SS Forged Pipe Nipple
317L Stainless Steel Threaded Pipe Nipple
SS UNS S31703 Forged Pipe Nipple
SS WERKSTOFF NR. 1.4438 Threaded Pipe Nipple
ASME 16.11 317L Stainless Steel Threaded Pipe Nipple

 

SS 317L Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

Stainless Steel 317L Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317L Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317L 1.4438 S31703 SUS 317L – – – X2CrNiMo18-15-4


Stainless Steel 317L Forged Threaded Fittings Price List

  • SS 317L Forged Fittings
    FOB Price: USD $1-600 / Piece
  • Stainless Steel 317L Threaded Fitting
    FOB Price: USD $1-600 / Piece
  • 317L Stainless Steel Forged Threaded Fittings
    FOB Price: USD $1-600 / Piece
  • ASTM A182 317L stainless steel Forged Fitting
    FOB Price: USD $1-600 / Piece
  • SS 317L Threaded Fittings
    FOB Price: USD $1-600 / Piece

Stainless Steel 317L Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317L Forged Threaded Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 317L Threaded Fitting Value Added Services

Material Testing:
We at PRATAP STEEL INDUSTRIES ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 317L Forged Fittings Packaging

SS 317L Forged Fittings Packaging 317L SS Threaded Fittings Packaging We focus on every procedure to assure quality, the package we usually take is pack SS 317L Threaded Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 317L Stainless Steel Forged Threaded Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The Stainless Steel 317L Threaded Fittings are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

SS 317L Forged Threaded Fitting Manufacturer Popular Searches

ss 317L class 3000 fittings pressure rating, 150# stainless steel 317L threaded fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, class 300 fittings pressure rating, 317L ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss 317L pipe coupling dimensions, steel pipe fitting dimensions chart, stainless steel 317L threaded fittings, ss 317L forged fittings price list, ss 317L forged fittings price, asme b16.11 fittings, 317L threaded fittings dimensions pdf, ss 317L threaded forged fittings dimensions,317L ss forged fittings definition, 3000 lb stainless steel forged fittings, 317L ss forged fittings definition, ss 317L forged steel fittings

Stainless Steel 317L Forged Fittings Supplier

Chennai, Gurgaon, Madrid, Montreal, Jeddah, Jamshedpur, Milan, Atyrau, Visakhapatnam, Perth, Colombo, Rajkot, Faridabad, Hanoi, Ranchi, Bengaluru, Aberdeen, Al Khobar, Busan, Bhopal, Petaling Jaya, Mumbai, Al Jubail, Istanbul, Ahmedabad, Dubai, Ernakulam, London, Toronto, Kanpur, Ahvaz, Moscow, Kolkata, Abu Dhabi, Ulsan, Haryana, Seoul, Hong Kong, Pimpri-Chinchwad, Noida, Edmonton, Nagpur, Singapore, Ankara, Thane, Caracas, New Delhi, Riyadh, Chiyoda, Bangkok, Ludhiana, Karachi, Algiers, Sydney, Gimhae-si, Courbevoie, Dallas, Navi Mumbai, Chandigarh, Tehran, Jaipur, Houston, Vung Tau, Cairo, Sharjah, Mexico City, Calgary, Bogota, Kuwait City, Howrah, Lahore, New York, Geoje-si, Indore, La Victoria, Secunderabad, Port-of-Spain, Coimbatore, Nashik, Dammam, Brisbane, Granada, Kuala Lumpur, Lagos, Pune, Manama, Rio de Janeiro, Los Angeles, Surat, Muscat, Ho Chi Minh City, Baroda, Thiruvananthapuram, Hyderabad, Melbourne, Vadodara, Santiago, Doha, Jakarta.

Stainless Steel 317L Threaded Fittings Exporter

Austria, Algeria, Brazil, Poland, Kenya, Costa Rica, Malaysia, Puerto Rico, Mexico, Nigeria, Netherlands, Namibia, Ghana, Belarus, Portugal, Azerbaijan, Macau, Lebanon, Japan, Thailand, Serbia, Libya, France, South Korea, Gabon, Nigeria, Afghanistan, Turkey, Ireland, Iraq, Finland, Iran, Germany, Israel, Poland, Venezuela, Morocco, Hungary, Hong Kong, Saudi Arabia, Romania, Qatar, Bolivia, India, Yemen, United Kingdom, New Zealand, Canada, Spain, Bulgaria, Kuwait, Estonia, Chile, Czech Republic, Philippines, Pakistan, Oman, South Africa, Iran, United States, Singapore, Gambia, Australia, Vietnam, Tibet, Switzerland, Angola, Peru, Bahrain, Nepal, Bangladesh, Lithuania, Trinidad & Tobago,Tunisia, Kazakhstan, Norway, Sweden, Chile, Russia, Indonesia, China, Egypt, Mexico, Ukraine, Belgium, Zimbabwe, Mongolia, Croatia, United Arab Emirates, Greece, Bhutan, Ecuador, Argentina, Taiwan, Slovakia, Denmark, Italy, Sri Lanka, Colombia, Jordan.