Our Products

Stainless Steel 316Ti Buttweld Fittings

Stainless Steel 316TI Pipe Fittings, SS 3d Pipe Bend, Stainless Steel 316TI 180 Deg bend, ASTM A403 WP316TI Stainless Steel 90 degree Elbow Exporters and Suppliers in Mumbai, India.

SS 5d Pipe Bend, Supplier of SS WP 316TI 45 degree Elbow, SS 316TI Equal Tee, 316TI Stainless Steel Reducer, SS 316TI Short Radius Elbow Supplier, SS WERKSTOFF NR. 1.4571 Cross Exporter in India.

PRATAP STEEL INDUSTRIES india is one of the prominent exporting houses of Stainless Steel 316Ti Pipe Fittings, which retains physical and mechanical properties similar to standard grades of 316. The main advantage of Stainless Steel 316Ti Elbow Butt Weld Pipe Fittings is that it can be held at higher temperatures for a longer period without sensitisation (precipitation) occurring. Stainless Steel 316Ti Reducer has good resistance to oxidation in intermittent service to 870 Degree C and in continuous service to 925 Degree C. However, continuous use at 425 Degree C – 860 Degree C is not recommended in Stainless Steel 316Ti Tee Butt Weld Pipe Fittings if corrosion resistance in water is required. Stainless Steel 316Ti Cross Butt Weld Pipe Fittings cannot be hardened by heat treatment. Solution treatment or annealing in Stainless Steel 316Ti Bends Butt Weld Pipe Fittings can be done by rapid cooling after heating to 1010 Degree C – 1120 Degree C. In this instance, Stainless Steel 316Ti Stub End is recommended due to its resistance to carbide precipitation. Where high strength is required at temperatures above 500 Degree C, Stainless Steel 316Ti End Cap is recommended. Stainless Steel 316Ti Dish Cap Butt Weld Pipe Fittings is readily brake or roll formed into a variety of parts. Stainless Steel 316Ti Lateral Tee Butt Weld Pipe Fittings is also suited to stamping, heading and drawing but post work annealing is recommended to relieve internal stresses.

ASME SA403 SS 316TI Long Stub End, Stainless Steel UNS S31635 Seamless Pipe Fittings, 316TI Stainless Steel End Cap, ANSI B16.9 Stainless Steel 316TI Welded Butt weld Fittings, SS U Pipe Bend, SS 316TI Pipe Elbow, SS 316TI Pipe bend Supplier in India.


Stainless Steel 316TI Lateral Tee
SS 316TI Stainless Steel Long Stub End
Stainless Steel 316TI Long & Short Radius Elbow
SS 316TI Pipe Fitting
SS 316TI 45 degree Elbow 

Stainless Steel 316TI Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

 

Types of Stainless Steel 316TI Buttweld Fittings

Stainless Steel 316TI 45degree Elbow Stainless Steel 316TI 45 Degree Elbow SS 316TI 45 Degree Elbow
316TI SS 45 Degree Elbow
SS 316TI Stainless Steel 45 Degree Elbow
SS UNS S31635 45 Degree Elbow
ASME SA403 WERKSTOFF NR.1.4571 90 Degree Elbow
Stainless Steel 316TI Pipe Fittings Stainless Steel 316TI Pipe Fittings SS 316TI Pipe Fittings
316TI SS Buttweld Fitting
316TI Stainless Steel Pipe Fitting
SS UNS S31635 Buttweld Fitting
SS WERKSTOFF NR.1.4571 Pipe Fittings
DIN 1.4571 Stainless Steel Buttweld Fitting
Stainless Steel 316TI Ecentric Reducer Stainless Steel 316TI Eccentric Reducer SS 316TI Eccentric Reducer
316TI SS Eccentric Reducer
316TI Stainless Steel Eccentric Reducer
SS UNS S31635 Eccentric Reducer
ASTM A403 WP WERKSTOFF NR.1.4571 Stainless Steel Eccentric Reducer
Stainless Steel 316TI Concentric Reducer Stainless Steel 316TI Concentric Reducer SS 316TI Concentric Reducer
316TI SS Concentric Reducer
316TI Stainless Steel Concentric  Reducer
SS UNS S31635 Concentric Reducer
ANSI B16.9 WP WERKSTOFF NR.1.4571 Stainless Steel Concentric Reducer
Stainless Steel 316TI Lateral Tee Stainless Steel 316TI Lateral Tee 316TI Lateral Tee
316TI SS Lateral Tee
316TI Stainless Steel Lateral Tee
SS UNS S31635 Lateral Tee
SS S31635 Lateral Tee
ASME B16.28 316Ti Stainless Steel Lateral Tee
Stainless Steel 316TI Equal Tee Stainless Steel 316TI Equal Tee SS 316TI Equal Tee
316TI SS Equal Tee
316TI Stainless Steel Equal Tee
ASME B16.28 WP 316TI Stainless Steel Equal Tee
SS WERKSTOFF NR.1.4571 Equal Tee
ASTM A403 Stainless Steel 316Ti Equal Tee
Stainless Steel 317L Long Stub End Stainless Steel 316TI Long Stub End SS 316TI Long Stub End
316TI SS Long Stub End
316TI Stainless Steel Long Stub End
SS UNS S31635 Long Stub End
SS 316Ti Long Stub End
ASTM A403 WP 316TI Stainless Steel Long Stub End
Stainless Steel 316TI Short Stub End Stainless Steel 316TI Short Stub End SS 316TI Short Stub End
316TI SS Short Stub End
316TI Stainless Steel Short Stub End
SS UNS S31635 Short Stub End
SS 316Ti Short Stub End
MSS-SP-43 Stainless Steel Short Stub End
Stainless Steel 316TI End Cap Stainless Steel 316TI End Cap SS 316TI End Cap
316TI SS End Cap
SS UNS S31635 End Cap
WERKSTOFF NR.1.4571 End Cap
ASTM A403 316TI Stainless Steel End Cap
Stainless Steel 316TI Bend Stainless Steel 316TI Bend SS 316TI Pipe Bend
316TI SS Pipe Bend
316TI Stainless Steel Bend
SS UNS S31635 Bend
SS 3d Pipe Bend
SS WERKSTOFF NR.1.4571 Bend
ASTM A403 Stainless Steel 316Ti Bend
Stainless Steel 316TI Equal Cross Stainless Steel 316TI Equal Cross SS 316TI Equal Cross
316TI SS Equal Cross
316TI Stainless Steel Equal Cross
SS UNS S31635 Equal Cross
SS WERKSTOFF NR.1.4571 Equal Cross
ANSI B16.9 Stainless Steel 316Ti Equal Cross

 

SS 316TI Pipe Fittings Chemical Composition

Grade C Ni Mn P S Cr Si Mo N
316TI 0.08 max 10.00 – 14.00 2.0 max 0.045 max 0.030 max 16.00 – 18.00 0.75 max 2.00 – 3.00 –

 

Stainless Steel 316TI Butt weld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399°C (2550°F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

 

Equivalent Grades for 316TI Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
316TI 1.4571 s31703 SUS 316Ti      320S31    08Ch17N13M2T   Z6CNDT17‐123 X6CrNiMoTi17-12-2

 

Stainless Steel 316TI Pipe Fittings Price List

  • 316TI Buttweld Fittings
    US $1-5 / Piece (FOB Price)
  • SS 316TI Pipe Fitting
    US $0.07 / Piece
  • Stainless Steel 316Ti Buttweld Fitting
    US $0.01-3 / Piece (FOB Price)
  • ASTM A403 316TI stainless steel Buttweld Fitting
    US $0.1-0.2 / Piece (FOB Price)
  • 316TI SS Pipe Fittings
    US $1-5 / Piece (FOB Price)

SS WERKSTOFF NR.1.4571 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 316TI Buttweld Fitting Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 316TI Buttweld Pipe Fittings Value Added Services

Material Testing:
We at PRATAP STEEL INDUSTRIES ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 316TI Pipe Fittings Packaging

Stainless Steel 316TI Buttweld Fitting Packaging Pipe Fittings Packaging Stainless Steel 316TI Buttweld Fitting are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. Stainless Steel 316TI Buttweld Fitting come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Industrial Buttweld Fittings.

SS 316TI Pipe Fittings Manufacturer Popular Searches

ss 316TI pipe fittings catalogue, ss 316TI pipe fittings price list, ss 316TI pipe fittings manufacturer, 316TI pipe fittings suppliers, ss 316TI fittings catalog, ss 316TI fittings manufacturer, stainless steel 316TI pipe fittings manufacturers in india, 316TI stainless steel fittings manufacturers in india

Stainless Steel 316TI Pipe Fittings Supplier

Kuala Lumpur, Montreal, Chiyoda, Granada, Surat, Seoul, Faridabad, Dubai, Abu Dhabi, Edmonton, Thane, Jeddah, Lagos, Bangkok, Indore, Vadodara, Rio de Janeiro, Ludhiana, Muscat, New Delhi, Jamshedpur, Kolkata, Toronto, Algiers, Kuwait City, Al Khobar, Sydney, Ahmedabad, Manama, Doha, Navi Mumbai, Mumbai, Thiruvananthapuram, Ulsan, Hong Kong, Ranchi, Geoje-si, Brisbane, Jaipur, Hanoi, Petaling Jaya, Howrah, Visakhapatnam, Los Angeles, Courbevoie, Vung Tau, Tehran, Bogota, Calgary, Ankara, Hyderabad, Rajkot, Lahore, Cairo, Gurgaon, Colombo, Singapore, Madrid, Jakarta, Ho Chi Minh City, Aberdeen, Bengaluru, Gimhae-si, Milan, Perth, Busan, Al Jubail, Istanbul, Houston, Pune, Ahvaz, Sharjah, Ernakulam, London, Dammam, Haryana, La Victoria, Kanpur, Nagpur, New York, Dallas, Karachi, Baroda, Pimpri-Chinchwad, Melbourne, Chandigarh, Caracas, Mexico City, Atyrau, Riyadh, Chennai, Nashik, Moscow, Bhopal, Noida, Secunderabad, Port-of-Spain, Coimbatore, Santiago.

Stainless Steel 316TI Buttweld Fittings Exporter

Brazil, Sweden, Serbia, Ghana, Yemen, Denmark, South Africa, Austria, Chile, Mongolia, Israel, Poland, Thailand, United Arab Emirates, Belarus, Philippines, Croatia, Finland, Angola, Bangladesh, Mexico, Hong Kong, Kenya, Belgium, Taiwan, Russia, Turkey, Libya, Romania, Canada, Nigeria, Portugal, New Zealand, Kazakhstan, France, Saudi Arabia, Nepal, Iran, Spain, Kuwait, Slovakia, Peru, Venezuela, Morocco, Algeria, Norway, Czech Republic, China, Argentina, Ireland, Ecuador, Bahrain, Italy, Greece, Egypt, Zimbabwe, United States, Tibet, United Kingdom, Qatar, Pakistan, Nigeria, Poland, Mexico, Iran, Azerbaijan, Germany, Namibia, South Korea, Japan, Netherlands, Puerto Rico, Lithuania, Afghanistan, Ukraine, India, Sri Lanka, Switzerland, Gambia, Australia, Estonia, Bhutan, Singapore, Chile, Oman, Iraq, Colombia, Bolivia, Bulgaria, Macau, Vietnam, Jordan, Costa Rica, Indonesia, Gabon, Trinidad & Tobago,Tunisia, Malaysia, Hungary, Lebanon.