Our Products

Stainless Steel 317L Buttweld Fittings

Supplier of SS WP 317L 45 degree Elbow, Stainless Steel 5d Pipe Bend, Stainless Steel 317L 180 Deg bend, ASTM A403 WP317L Stainless Steel 90 degree Elbow Exporters and Suppliers in Mumbai, India.

ASME SA403 SS 317L Long Stub, Stainless Steel 317L Pipe Fittings, SS 317L Equal Tee, SS 317L Pipe Elbow, SS 317L Short Radius Elbow Supplier, Stainless Steel 1.5d Pipe Bend, SS WERKSTOFF NR. 1.4438 Cross Exporter in India.

PRATAP STEEL INDUSTRIES india is one of the pioneer supplier and dealer of Stainless Steel 317L Pipe Fittings, which have somewhat higher thermal conductivities than the austenitic grades, which may be an advantage in certain applications. This expansion coefficient not only varies Stainless Steel 317L Elbow it also increases slightly with temperature. Stainless Steel 317L Reducer Butt Weld Pipe Fittings has a coefficient over the temperature range Zero Degree C to 100 Degree C, but increases above this temperature. The effect of thermal expansion in Stainless Steel 317L Tee Butt Weld Pipe Fittings is most noticeable where components are restrained, as the expansion results in buckling and bending. A problem can also arise if Stainless Steel 317L Cross Butt Weld Pipe Fittings are fabricated together and then heated, where dissimilar coefficients will again result in buckling or bending. In general, the quite high thermal expansion rates of the austenitic Stainless Steel 317L Bends mean that fabrications in these alloys may have more dimensional problems than similar fabrications in other alloy steels. Localised stresses from expansion during heating and cooling of Stainless Steel 317L Stub End Butt Weld Pipe Fittings can contribute to stress corrosion cracking in an environment which would not normally attack the metal. These applications of Stainless Steel 317L End Cap require design to minimise the adverse effects of temperature differentials such as the use of expansion joints to permit movement without distortion and the avoidance of notches and abrupt changes of section.

Stainless Steel 10d Pipe Bend, Stainless Steel UNS S31703 Buttweld Elbow, Stainless Steel 317L Seamless Pipe Fittings, ANSI B16.9 Stainless Steel 317L Welded Buttweld Fittings, 317L Stainless Steel End Cap, 317L Stainless Steel Reducer, SS 317L Pipe bend Supplier in India.


Stainless Steel 317L Lateral Tee
SS 317L Stainless Steel Long Stub End
Stainless Steel 317L Long & Short Radius Elbow
SS 317L Pipe Fitting
SS 317L 45 degree Elbow 

http://www.manojsteel.com-ss-317L-buttweld-fittings-supplier-exporter/

Stainless Steel 317L Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

 

Types of Stainless Steel 317L Buttweld Fittings

Stainless Steel 317L 45degree Elbow Stainless Steel 317L 45 Degree Elbow SS 317L 45 Degree Elbow
SS 317L SS 90 Degree Elbow
SS 317L Stainless Steel 45 Degree Elbow
SS UNS S31703 45 Degree Elbow SS S31009 Degree Elbow
ASME SA403 WERKSTOFF NR.1.4438 90 Degree Elbow
SS 317L Pipe Fittings Stainless Steel 317L Pipe Fittings SS 317L Pipe Fittings
317L SS Buttweld Fitting
317L Stainless Steel Pipe Fitting
SS UNS S31703 Buttweld Fitting
SS WERKSTOFF NR.1.4438 Pipe Fittings
ASTM A403 317L Stainless Steel Buttweld Fitting
SS 317L Ecentric Reducer Stainless Steel 317L Eccentric Reducer SS  317L Eccentric Reducer
317L SS Eccentric Reducer
317L Stainless Steel Eccentric Reducer
SS UNS S31703 Eccentric Reducer
ASTM A403 WP WERKSTOFF NR.1.4438 Stainless Steel Eccentric Reducer
SS 317L Concentric Reducer Stainless Steel 317L Concentric Reducer SS 317L Concentric Reducer
317L SS Concentric Reducer
317L Stainless Steel Concentric  Reducer
SS UNS S31703 Concentric Reducer
ANSI B16.9 WP WERKSTOFF NR.1.4438 Stainless Steel Concentric Reducer
SS 317L Lateral Tee Stainless Steel 317L Lateral Tee 317L Lateral Tee
317L SS Lateral Tee
317L Stainless Steel Lateral Tee
SS UNS S31703 Lateral Tee
SS 317L Lateral Tee
ASME B16.28 WP 304L Stainless Steel Lateral Tee
SS 317L Equal Tee Stainless Steel 317L Equal Tee SS 317L Equal Tee
317L SS Equal Tee
317L Stainless Steel Equal Tee
ASME B16.28 WP 317L Stainless Steel Equal Tee
SS WERKSTOFF NR.1.4438 Equal Tee
ASTM A403 Stainless Steel 317L Equal Tee
SS 317L Long Stub End Stainless Steel 317L Long Stub End SS 317L Long Stub End
317L SS Long Stub End
317L Stainless Steel Long Stub End
SS UNS S31703 Long Stub End
SS 317L Long Stub End
ASTM A403 WP 317L Stainless Steel Long Stub End
SS 317L Short Stub End Stainless Steel 317L Short Stub End SS 317L Short Stub End
317L SS Short Stub End
317L Stainless Steel Short Stub End
SS UNS S31703 Short Stub End
SS 317L Short Stub End
MSS-SP-43 Stainless Steel 317L Short Stub End
SS 317L End Cap Stainless Steel 317L End Cap SS 317L End Cap
317L SS End Cap
SS UNS S31703 End Cap
SS WERKSTOFF NR.1.4438 End Cap
ASTM A403 317L Stainless Steel End Cap
SS 317L Bend Stainless Steel 317L Bend SS 317L Pipe Bend
317L SS Pipe Bend
317L Stainless Steel Bend
SS UNS S31703 Bend
Stainless Steel 3d Pipe Bend
WERKSTOFF NR.1.4438 Bend
ASTM A403 Stainless Steel 317L Bend
SS 317L Equal Cross Stainless Steel 317L Equal Cross SS 317L Equal Cross
317L SS Equal Cross
317L Stainless Steel Equal Cross
SS UNS S31703 Equal Cross
Stainless Steel 317L Equal Cross
ANSI B16.9 WERKSTOFF NR.1.4438 Stainless Steel Equal Cross

 

SS 317L Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

 

Stainless Steel 317L Butt weld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

 

Equivalent Grades for 317L Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
317L  1.4438 s31703      SUS 317L      –             –                –          X2CrNiMo18-15-4

 

Stainless Steel 317L Pipe Fittings Price List

  • 317L Buttweld Fittings
    US $1-5 / Piece (FOB Price)
  • SS 317L Pipe Fitting
    US $0.07 / Piece
  • 317L Stainless Steel Buttweld Fitting
    US $0.01-3 / Piece (FOB Price)
  • ASTM A403 317L stainless steel Buttweld Fitting
    US $0.1-0.2 / Piece (FOB Price)
  • 317L Pipe Fittings
    US $1-5 / Piece (FOB Price)

SS WERKSTOFF NR.1.4438 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 317L Buttweld Fitting Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 317L Buttweld Pipe Fittings Value Added Services

Material Testing:
We at PRATAP STEEL INDUSTRIES ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 317L Pipe Fittings Packaging

Stainless Steel 317L Buttweld Fitting Packing SS 317L Pipe Fittings Packaging Stainless Steel 317L Buttweld Fitting are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. Stainless Steel 317L Buttweld Fitting come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Industrial Buttweld Fittings.

SS 317L Pipe Fittings Manufacturer Popular Searches

ss 317l pipe fittings catalogue, ss 317l pipe fittings price list, ss 317l pipe fittings manufacturer, 317l pipe fittings suppliers, ss 317l fittings catalog, ss 317l fittings manufacturer, stainless steel 317l pipe fittings manufacturers in india, 317l stainless steel fittings manufacturers in india

Stainless Steel 317L Pipe Fittings Supplier

Jamshedpur, Surat, Bogota, Rajkot, Hong Kong, Ernakulam, Al Jubail, Melbourne, Pune, Busan, Calgary, Chandigarh, Noida, Lahore, Kuwait City, Mumbai, Dubai, Sharjah, Jeddah, Thane, Howrah, Port-of-Spain, Ludhiana, Petaling Jaya, Granada, Bengaluru, Montreal, Chiyoda, Seoul, Dammam, Aberdeen, Manama, Indore, Karachi, Tehran, Madrid, Ahmedabad, Bangkok, Gimhae-si, Doha, Kolkata, Secunderabad, Jakarta, Istanbul, Abu Dhabi, Atyrau, Rio de Janeiro, Haryana, Thiruvananthapuram, Milan, Los Angeles, New York, Caracas, Cairo, Baroda, Hyderabad, Geoje-si, Kuala Lumpur, Brisbane, Muscat, Edmonton, La Victoria, Mexico City, Courbevoie, Santiago, Toronto, Lagos, Coimbatore, Dallas, Sydney, Nagpur, Riyadh, Ranchi, Houston, Hanoi, Algiers, Ankara, Ulsan, Moscow, Navi Mumbai, Al Khobar, Jaipur, Vung Tau, Visakhapatnam, Gurgaon, Singapore, Bhopal, Faridabad, New Delhi, Kanpur, Ho Chi Minh City, Pimpri-Chinchwad, Chennai, London, Colombo, Vadodara, Perth, Nashik, Ahvaz.

Stainless Steel 317L Buttweld Fittings Exporter

Bulgaria, Qatar, Morocco, Sweden, Mexico, Chile, Saudi Arabia, Peru, Egypt, Finland, Libya, Mongolia, Costa Rica, Canada, Kenya, Romania, Kazakhstan, Russia, Hong Kong, India, Israel, Vietnam, Pakistan, Austria, Indonesia, Greece, Lithuania, Malaysia, Estonia, Norway, Thailand, Kuwait, Netherlands, Portugal, Iraq, Gambia, Sri Lanka, France, Philippines, Hungary, Iran, Venezuela, Serbia, United Kingdom, Puerto Rico, Trinidad & Tobago,Tunisia, South Korea, Singapore, Namibia, Denmark, Zimbabwe, Germany, Mexico, Ukraine, Croatia, Italy, Gabon, Slovakia, South Africa, United Arab Emirates, Argentina, Turkey, New Zealand, Switzerland, Iran, Ecuador, Azerbaijan, Spain, Nepal, Oman, Lebanon, Belarus, Algeria, Jordan, Ghana, Bangladesh, Ireland, Bhutan, Chile, Bolivia, Angola, Bahrain, Nigeria, Belgium, Yemen, Colombia, Nigeria, Poland, Tibet, Macau, Czech Republic, United States, Australia, Taiwan, China, Brazil, Japan, Poland, Afghanistan.