Our Products

Nickel 200 Wire

Nickel GOST НП-2 Welding, 200 Nickel Coil Wire, Alloy 200 Wire, 200 Nickel Wire, ASTM B160 Nickel Wire Suppliers and Exporters in Mumbai, India.

Nickel WERKSTOFF NR. 2.4066 Wire, Nickel UNS N02200 Bright Wire, Exporters of ASTM SB160 200 Nickel Wire Manufacturer in India.

PRATAP STEEL INDUSTRIES india is one of the prominent dealer and manufacturer of quality Nickel Alloy 200 Wire, where chlorine additives would be an alternative. Nickel 200 Coil Wire is a Nickel based alloy containing 47.5 % Nickel, 22 % Chromium and 18.5 % Iron, with small amounts of Cobalt, Molybdenum and Tungsten. All hot – or cold – worked parts of Nickel 200 Wire should be annealed and rapidly cooled in order to restore the best balance of properties. Carbide tools in Nickel 200 Wire should have smaller angles than high – speed tools and operating speeds can be higher. After 100 hours in petroleum coke, Nickel 200 is completely penetrated by carburization; whereas its specimens showed no carburization at all. Useful Properties for Aircraft and Furnace Parts, Nickel 200 Wire is recommended especially for use in furnace applications. Alloy 200 Wire has unusual resistance to oxidizing, reducing, and neutral atmospheres, where work hardening occurs whenever a tool makes a cut. Its uncommon resistance to oxidation, combined with exceptional heat resistance and fabricability, make Alloy 200 a widely sought – after blend in a number of industries. Thoroughly clean work piece after machining Alloy 200 Coil Wire, is to prevent surface contamination during subsequent heat treating. Because of the low thermal conductivity in Alloy 200 Wire, heat build – up is a problem, and therefore, correct coolant application is necessary.

Nickel 200 Wire Specifications
Specifications : ASTM B160 ASME SB160 Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 Length : 100 mm TO 6000 mm Diameter : 10 mm To 100 mm Specialize : Filler Wire, Coil Wire, Electrode Wire, Welding Wire.

 

Types of Nickel 200 Wire

Nickel 200 Wire Nickel 200 Wire Nickel 200 Wire
200 Nickel Wire
200 Alloy Wire
Nickel UNS N02200 Wire
Nickel WERKSTOFF NR. 2.4066 Wire
ASTM B160 200 Nickel Wire
Nickel 200 Coil Wire Nickel 200 Coil Wire Nickel 200 Coil Wire
200 Nickel Coil Wire
Nickel Alloy 200 Steel Coil Wire
Nickel UNS N02200 Coil Wire
Nickel WERKSTOFF NR. 2.4066 Coil Wire
ASME SB160 200 Nickel Coil Wire

 

200 Nickel Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Nickel 200 0.15 max 0.35 max 0.35 max 0.25 max 0.01 max – 0.40 max 99.0 min –

Nickel 200 Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200  8.9 g/cm3  1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2


Nickel 200 Wire Price List

  • 200 Nickel Wire
    US $900-7771 / Metric Ton (FOB Price)
  • Nickel Alloy 200 Wire
    US $900-7771 / Metric Ton (FOB Price)
  • Nickel 200 Wire
    US $900-7771 / Metric Ton (FOB Price)
  • ASTM B160 200 Nickel Wire
    US $900-7771 / Metric Ton (FOB Price)
  • ASME SB160 200 Wire
    US $900-7771 / Metric Ton (FOB Price)

Nickel 200 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

200 Nickel Wire Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME Nickel 200 Wire Value Added Services

Material Testing:
We at PRATAP STEEL INDUSTRIES ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Nickel 200 Wire Packaging

Nickel 200 Wire Packaging Nickel 200 Wire PackingNickel 200 Wire are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. 200 Nickel Wire come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Wire. Nickel 200 ASTM B160 Wire packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.